5606 Full Immersion PRT

  • 5606 Full Immersion PRT

主要特性

  • 可在 -200 °C 至 160 °C 的温度范围内运行。
  • 准确度 ±0.05 °C。
  • 这些 PRT 的过渡连接处和引线均能够承受全量程的 PRT 温度。
  • 独特的探头密封可防止湿气进入。
  • 提供 NVLAP 认可的校准。
  • 适用于校准/验证实验室或生物冷冻箱、高压灭菌器、烤箱、试验箱、温度受控区等设备中进行的 IQ/OQ/PQ 认证程序、温度测绘或数据记录中的传感器。
需要报价

产品概述: 5606 Full Immersion PRT

Ultra-Compact, Reliable, and Designed for Complete Immersion

Total Flexibility for Extreme Environments

The Fluke 5606 Full Immersion Platinum Resistance Thermometer (PRT) offers an unmatched solution for applications where full immersion of the probe—including transition junction and lead wires—is required. With a compact length of just two inches (50 mm) and a sheath diameter of only 1/8 inch (3.1 mm), the 5606 delivers accuracy and durability in the tightest spaces.

Key Features and Benefits

  • Truly Full Immersion – No need to calculate minimum immersion depth. Simply immerse the entire probe, transition junction, and lead wires over the entire operating range—from –200 °C to 160 °C—in either non-corrosive liquids or dry mediums.
  • High Accuracy in a Compact Size – Achieve calibration accuracies as good as ±0.05 °C, thanks to the specially constructed 100 Ω precision sensing element (alpha = 0.00385) that also blocks moisture ingress.
  • Superior Moisture Protection – Single-conductor enameled copper lead wires prevent moisture from wicking into the sensing element, offering better protection than traditional stranded leads.
  • Flexible and Easy Installation – Lead wires measure no greater than 0.2 mm in diameter, making it simple to route through tight spaces—such as a freezer door—without energy loss.
  • Proven Durability – The 5606 has demonstrated excellent performance in heat transfer fluids like silicone oil, mineral oil, ethanol, and even liquid nitrogen, with no loss of integrity in the transition junction or lead wire insulation.

Engineered for Demanding Applications

The 5606 Full Immersion PRT is specifically designed to thrive in extreme environments. Both the transition junction and lead wires are built to endure temperatures covering the full probe range, ensuring complete reliability in challenging conditions.

“Immersion” means exposure to extreme temperatures—not just being submerged in a liquid—making the 5606 ideal for a wide variety of rigorous uses.

产品规格: 5606 Full Immersion PRT

General Specifications
Temperature range-200°C to 160°C
Nominal resistance at 0.01°C100 Ω ±0.1 Ω
Temperature coefficient0.00385 Ω/Ω/°C
Accuracy1±0.04°C at 0.01°C
±0.06°C at 160°C
Short-term repeatability2±0.03°C at 0.01°C
±0.04°C at 160°C
Drift3±0.03°C at 0.01°C
±0.04°C at 160°C
Hysteresis±0.015°C
Sheath length50 mm ±5 mm
(2 in ±0.2 in)
Sheath diameter3.1 mm ±0.1 mm (1/8 in ±0.004 in)
Sheath material316 SST
Transition junction temperature range4-200°C to 160°C
Transition junction dimensionsNo transition
Sensor length30 mm ±3mm (1.2 in ±0.1 in)
Sensor location3 mm ±1 mm from tip (1.2 in ±0.04 in)
Minimum insulation resistance20 MΩ at 23°C
Minimum immersion lengthFull immersion
Maximum immersion depth in liquid mediumFull immersion
Maximum immersion depth in dry MediumFull immersion
Response time512 seconds typical
Self heating (in 0°C bath)±0.003°C
Lead-wire cable typeEnameled copper wire
Lead-wire length2.4 meters (8 ft)
Lead-wire temperature range160°C
CalibrationCalibration not included. NVLAP accredited calibration available. See ordering information.
1. Includes calibration and 100 hr drift (k = 2).
2. Three thermal cycles from min to max temp, includes hysteresis, 95% confidence (k = 2).
3. After 100 hours at max temp, 95% confidence (k = 2).
4. Temperatures outside this range will cause irreparable damage.
5. Per ASTM E 644.
Calibration Uncertainty
Temperature-197°C1924 Calibration Uncertainty6 0.03°C
Tolerance w/out Calibration7 0.4°C
 -38°C1924 Calibration Uncertainty6 0.03°C
Tolerance w/out Calibration7 0.2°C
 0°C1924 Calibration Uncertainty6 0.03°C
Tolerance w/out Calibration7 0.1°C
 100°C1924 Calibration Uncertainty6 0.045°C
Tolerance w/out Calibration7 0.3°C
 157°C1924 Calibration Uncertainty6 0.05°C
Tolerance w/out Calibration7 0.4°C
6. Lab code 200348-0
7. Each PRT includes a certificate with a measured R0 value.
An uncalibrated 5606 meets ASTM E 1137 Grade A Classification of Tolerances.
Use the coefficients below to achieve the tolerances listed in the “No Calibration” column or calculate the Grade A tolerance using the following formula:
Grade A = ±[0.13 + 0.0017|t|]°C
where: |t| = value of temperature (°C) without regard to sign. See ASTM E 1137.
R0: Enter the R0 value provided
A: 3.9083 x 10–3
B: –5.775 x 10–7
C: –4.183 x 10–12

型号: 5606 Full Immersion PRT

5606-50-P

Fluke 5606-50-P Full Immersion PRT
Full Immersion PRTs Probe, 50 mm, –200 to 160°C, INFO-CON termination for 1523 or 1524

For Fluke 5606-50-X with other terminations below, please visit us.Flukecal.com and request a quote


† X = termination. Specify “A” (INFO-CON for 914X), “B” (bare wire), “D” (5-pin DIN for Tweener Thermometers), “G” (gold pins), “I” (INFO-CON for 1521 or 1522), “J” (banana plugs), “L” (mini spade lugs), “M” (mini banana plugs), or “S” (spade lugs).

5606 Full Immersion PRT

1930-4-10
系统对比校准，-200 至 157°

5606-50-X
探头，浸入式 PRT，50 mm，-200 到 160°C

† X = 终止。指定“A”（适用于 914X 的 INFO-CON）、“B”（裸线）、“D”（适用于 Tweener 温度计的 5 针 DIN）、“G”（金针）、“J”（香蕉插头）、“L”（微型平接线片）、“M”（微型香蕉插头）、“P”（适用于 1523 或 1524 的 INFO-CON）或“S” （平接线片）。
1930-5-10

系统对比校准，-40 至 157